BSPMW - S-291 SUPER HIDE FIELD MARKING PAINT

  • MSDS: BSPMW
  • Manufacturer: RICHARD'S PAINT MFG CO INC
  • Product Name: S-291 SUPER HIDE FIELD MARKING PAINT
  • National Stock Number: 8010-00F031971
Product Identification

Product ID:S-291 SUPER HIDE FIELD MARKING PAINT
MSDS Date:03/11/1991
FSC:8010
NIIN:00F031971
MSDS Number: BSPMW

Responsible Party
RICHARD'S PAINT MFG CO INC
200 PAINT STREET
ROCKLEDGE, FL 32955
US

Emergency Phone: 407-636-6200

Info Phone: 407-636-6200

Cage: RICH1

Contractor
RICHARD'S PAINT MFG CO INC
ROCKLEDGE, FL 32955 US

Telephone: 407-636-6200

Cage: RICH1

Ingredients

1,2-PROPANEDIOL (PROPYLENE GLYCOL)

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: <5%


0.50 LB/GL OR 60 G/L; MATERIAL

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY TRACT
IRRITATION. EYES: SEVERE IRRITATION. SKIN: IRRITATION & DERMATITIS.
INGESTION: GASTROINTESTINAL IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS, BREATHING DIFFICULTY,
HEADACHES, LOSS OF COORDINATION. EYES: TEARING, REDNESS, BLURRED
VISION. SKIN: DRYING, DEFATTING, CRACKS. INGESTION: VOMITING,
NAUSEA, DIARRHEA. ASPIRATION MAY CAUSE CHEMICAL PNEUMONITIS &
PULMONARY EDEMA.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING STOP, APPLY
ARTIFICIAL RESPIRATION. EYES: FLUSH W/PLNETY OF WATER FOR 15 MINS.
SKIN: WASH THOROUGHLY W/SOAP & WATER. INGESTION: DON'T INDUCE
VOMITING. ASP IRATION HAZARD. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:214F
Lower Limits:2.6%
Upper Limits:12.5%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:WEAR RESPIRATORY EQUIPMENT. WATER SHOULD NOT
BE USED EXCEPT AS FOG TO KEEP NEARBY CONTAINERS COOL.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:ELIMINATE IGNITION SOURCES. PROVIDE GOOD
VENTILATION. COVER W/INERT, ABSORBENT MATERIAL & REMOVE TO DISPOSAL
CONTAINER.

Handling

Handling and Storage Precautions:AVOID HOT METAL SURFACES. USE IN WELL
VENTILATED AREAS. KEEP CONTAINERS CLOSED WHEN NOT IN USE.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED CARTRIDGE RESPIRATOR SUITABLE
TO KEEP AIRBORNE MISTS/VAPORS BELOW TLV. WHEN USING IN POORLY
VENTILATED & CONFINED AREAS, USE A FRESH AIR SUPPLYING RESPIRATOR
OR SELF-CONTAINED BREAT HING APPARATUS.
Ventilation:GENERAL MECHANICAL OR LOCAL EXHAUST TO KEEP CONCENTRATIONS
BELOW TLV. EQUIPMENT SHOULD BE EXPLOSION-PROOF.
Protective Gloves:IMPERMEABLE
Eye Protection:CHEMICAL SAFETY GLASSES, GOGGLES
Other Protective Equipment:FACESHIELDS, IMPERMEABLE APRONS, HEAD CAPS,
EYE WASHES & SAFETY SHOWERS
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:369F
Vapor Density:>1
Spec Gravity:1.5
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETE

Stability

Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, STRONG ACIDS, & OXIDIZING AGENTS
Stability Condition to Avoid:EXCESSIVE HEAT, HOT METAL SURFACES, OPEN
FLAMES & OTHER IGNITION SOURCES
Hazardous Decomposition Products:CO2 & CO

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.